Skip to Main Content U.S. Department of Energy
EE Banner

Facilities & Laboratories

Chemical Engineering Laboratory (CEL)

The CEL is a reinforced concrete block building with two laboratory areas containing high-pressure reactor systems for chemical process development. In the outer Laboratory area, placed in fume hoods, are three small, stirred batch reactors for use in preliminary testing of chemical processes or catalyst formulations. These reactors have internal volumes of 100 or 300 milliliters and can be operated at up to 300°C and 2500 psig. They are equipped with a liquid phase sample removal system that can be operated at high-temperature and high-pressure processing conditions. The inner high-pressure reactor room contains three continuous flow reactor systems used in fixed-bed catalytic processing. Two units normally have laboratory-scale tubular reactors of 40-milliliter internal volume while the third unit has a 1-liter reactor volume. All three reactor systems are heated with individual circulating oil heating baths. The reactors are operable at up to 3000 psig and 300°C. Process flow is controlled by individual high-pressure metering syringe pumps. Each unit has a dual piston pump that can maintain online continuous flow by automatic changeover and refill of the 500-milliliter syringe cylinders. Data acquisition and process control is maintained through a laboratory; view computer-based system. All of these reactors typically involve catalytic processing and hydrogen reactions. The CEL has a stand-alone hydrogen compressor that feeds the building's hydrogen supply system. Hydrogen at up to 3000 psig can be fed into any or all of the reactors simultaneously. The CEL also contains a chromatographic gas analysis system with both thermal conductivity and flame ionization detector capability


Energy and Efficiency External

Related Links